Digital display biochemical incubator

Details Images

Use Scenarios

Microbiological Cultivation and Environmental Testing Applications

In microbiology labs and environmental testing facilities, this laboratory incubator provides a stable, uniform temperature environment vital for accurate culture growth and BOD testing. Its dual cooling/heating capability and optional BOD socket enable continuous in-incubator electrical power for biological oxygen demand monitoring, complying with regulatory requirements. The adjustable airflow minimizes sample evaporation, enhancing reliability in long-term assays. This incubator integrates into lab workflows as a dependable component ensuring precise control critical to experimental success.

Pharmaceutical and Agricultural Research Environments

Within pharmaceutical testing and agricultural research settings, the incubator supports thermal processing, seed germination studies, and cultivation tests that demand exact temperature maintenance. With a temperature range extending to 70°C and uniform heating distribution, it addresses complex thermal profiles required by these industries. Its robust construction and programmable control systems facilitate protocol adherence, data reproducibility, and safety. Acting as essential incubator equipment, it streamlines research workflows by maintaining consistent conditions critical for product development and scientific validation.

1. What is the temperature control range of this incubator? A The standard temperature range is 0~70℃, with both cooling and heating dual control functions, suitable for low-temperature and constant-temperature incubation.

2. What is the difference between F model and standard model? A The F series supports optional waterproof BOD socket, specially designed for national standard 5-day BOD water quality test; standard models do not have this optional accessory.

3. What power supply do large-capacity models use? A 70L~800L adopt AC220V 50Hz lab power supply; 1000L and 1500L large dual-chamber models use industrial AC380V 50Hz power supply.

4. Can the inner liner be removed for cleaning and disinfection? A The full stainless steel liner is fully detachable, which can be taken out for flushing, alcohol wiping and high-temperature disinfection, no sanitary dead corners to avoid cross-contamination of strains.

5. Can I observe samples without opening the door? A Equipped with double-layer tempered heat-insulating glass door. It has excellent heat insulation performance, samples can be observed directly without opening the door, greatly reducing temperature fluctuation inside the chamber.

6. Will the temperature program be lost after power failure? A Built-in permanent parameter memory chip saves all temperature and timing settings after power cut or trip, no need to re-edit programs after restart.

7. Can it connect to a computer for remote temperature data collection? A Yes. With optional RS485 communication interface, it can connect to host computer and lab LIMS system to view and export full temperature curves in real time.

8. What extra accessories are needed for 5-day BOD water test? A It is recommended to equip a special waterproof BOD socket to continuously supply power to the BOD dissolved oxygen probe, fully complying with national testing standards.

9. Will frequent start-stop shorten the compressor service life? A The unit is equipped with compressor delay start and shutdown interval protection to avoid instantaneous current impact after power recovery, reduce loss and extend service life effectively.

10. How about temperature uniformity inside the chamber? Is there a big temperature difference between samples in one batch? A Horizontal large circulating air duct is adopted, the constant temperature deviation under no load is ±0.5℃, the temperature difference in all areas of the chamber is extremely small, and parallel experimental data have high repeatability.

11. Can the cabinet be moved? Does fixed installation required? A Universal moving casters and fixed support feet are installed at the bottom, the unit can be moved freely without foundation fixing.

12. How to solve serious water evaporation of samples during long-term incubation? A Continuously variable speed circulating fan is optional to reduce internal airflow speed and slow down water volatilization, suitable for water-losing strains and cell culture.

13. Is the running noise loud? Can it be placed in office labs? A Low-noise silent compressor and circulation fan are adopted, the overall running noise is low, suitable for ordinary labs and office environments.

14. What is the load capacity of the shelf? Can large conical flasks be placed? A Standard stainless steel shelves have excellent bearing capacity, can stably hold petri dishes, conical flasks and BOD bottles without deformation under mass placement.

15. Can the unit maintain stable low-temperature incubation when the ambient temperature is above 35℃ in summer? A Independent dual cooling & heating control system can stably maintain 4~25℃ low-temperature incubation even under high summer room temperature, barely affected by ambient temperature.

16. Can segmented timing and constant temperature programs be set? A Yes. Long-time timing and multi-stage constant temperature duration can be customized on the panel to meet strain domestication and segmented incubation processes.

17. Is the shell resistant to acid and alkali corrosion? A The shell is made of thick cold-rolled steel plate with electrostatic spraying, resistant to slight acid and alkali volatilization in daily use; the full stainless inner liner resists cleaning corrosion better.